Anyone relocate their PCM to the interior using the stock engine harness?
I would like to move my computer to just inside the firewall, about where the heater/AC Box is [was].
Maybe mount it to the plate that will cover the hole.
I'm wondering if the stock wiring harness is long enough without having to extend any of the wires. This would be for the wiring that runs to the engine, not those two connectors & wiring that run forward to the headlight area and across the core support. I would already be rewiring the forward lamp harness as I would also be relocating the injector, fans/actr, and pcm fuses from the 'Underhood Electrical Center' to the interior as well.

No problem....I moved mine into the GLOVE BOX actually and mounted the Underhood Electrical Center on the floor of the passenger side...I have no AC/Heater.....just a plate.....with a little work the PCM wires should get you in the car fairly easy...as for the UEC...since the wires wrap to the drivers front.....you have enough length...with carefull pruning of "unnecessary" items which I have forgotten now...to make it into the back seat if you wanted to....

Excellent.
I already have the plans worked out in my head.
the UEC has already been, um, 'addressed'.
UEC
MUCH simpler now.
Before shot

Not related to the PCM (which I really want to get inside the car but haven't), but I came across this in a site cleanup a couple of days ago:

http://www.z28racergirl.com/images/P8050008.JPG

Makes me shudder looking at that now.

Jason

I wish mine looked like that already, I just finished up removal last night. Today starts the process of looming it back together

...NICE prune job.....isn't that MUCH better! Mine was very similar....

...that is long gone, gone, gone.....my cage builder was kind enough to "remove" that while putting in the cage, so I "dealt" with it appropriately...