HVAC Blower Question |
|
HVAC Blower Question |
Oct 19 2023, 10:02 PM
Post
#1
|
|
Veteran Member Group: Advanced Members Posts: 3,831 Joined: 3-July 04 From: Pearland, Texas Member No.: 385 |
I took the blower out of our 92 to replace it, and it appears that the blower cage is pressed on. I can see little, rusty, splines on the shaft, and no nut, nor threads for a nut. The replacement motor has a nut on the end to hold the cage on. I've hit the stud with PB Blaster and after sitting a while, tapped on it with a small hammer. No budge.
Is it really pressed on, and, if so, what's the trick for getting it off? Thanks. |
|
|
Oct 25 2023, 10:07 PM
Post
#2
|
|
Veteran Member Group: Advanced Members Posts: 3,831 Joined: 3-July 04 From: Pearland, Texas Member No.: 385 |
While putting things back together, is appears parts of the air ducting have been repaired. That, or they used what looks like black RTV to put the under dash ducts together.
I finally got things put together and running. Yaay OEM 'replacement' parts, again!! The blower switch, although it looked the same, definitely was NOT. I think I got something that would work, though. I tried running a strip of sheet aluminum from the existing hole to the other side, but it wouldn't fit with the screws I was using. I decided to drill a hole in the strip to put over the knob stud, then use the lower OEM mounting spot to secure the bottom of the switch. (IMG:https://media.fotki.com/2v2eT7PZyxJDYiP.jpg) Note that the old switch has been kind of warm. (IMG:https://media.fotki.com/2v2eT7PvyxJDYiP.jpg) While putting things back together, I did discover that the radio in our car, a regular AM/FM radio, was apparently 'bueno': (IMG:https://media.fotki.com/2v2eT7R5MxJDYiP.jpg) The HVAC/radio cover plate was missing a screw, so I reinstalled the screw that goes behind the under-dash cover. I need another. Any idea where I can get more of these Torx-head screws, other than a junk yard? (IMG:https://media.fotki.com/2v2eT7sdqxJDYiP.jpg) Glad THAT'S over!! Now, I can get back to installing the emblems and side molding on our SVO!! |
|
|
Oct 28 2023, 07:54 PM
Post
#3
|
|
Veteran Member Group: Advanced Members Posts: 3,831 Joined: 3-July 04 From: Pearland, Texas Member No.: 385 |
<SNIP> The HVAC/radio cover plate was missing a screw, so I reinstalled the screw that goes behind the under-dash cover. I need another. Any idea where I can get more of these Torx-head screws, other than a junk yard? (IMG:https://media.fotki.com/2v2eT7sdqxJDYiP.jpg) <SNIP> Well, this has become more than just a rhetorical question, One of our fav. gun shops is across the street from the Pick-N-Pull we use(d) for parts. When getting out of the truck, I noted to my co-driver that we may need to stop off at the PnP soon as I'm missing some parts, looking in the direction of the place. I then saw the empty parking lot and the 'For Sale' sign in it. My bride commented that they probably went under since we hadn't been there in a while. (IMG:style_emoticons/default/dry.gif) ETA: Hawks has them, so order has been placed. This post has been edited by CrashTestDummy: Oct 28 2023, 08:26 PM |
|
|
Lo-Fi Version | Time is now: 26th September 2024 - 04:46 AM |