![]() |
|
![]() |
![]()
Post
#1
|
|
FRRAX Owner/Admin ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 15,423 Joined: 13-February 04 From: Ohio Member No.: 196 ![]() |
I got up at 2am and drug a trailer almost 700 miles today to bring home a 2002 Z28 convertible (6 speed manual). It's a virtual twin (other than a convertible instead of t tops) to my original 2002 that I bought new. I actually believe every option matches right down to the color. It came with piles of service records, a receipt for a new GM installed engine (15k miles/4 years ago) as well as new clutch (with the engine), new window regulators and all kinds of other stuff. The previous owners spent a fortune at the dealer with this car. It was a summer car at the house on lake Michigan. I don't think it's ever seen anything beyond some occasional rain. The steering column is tight and there's no major wear on the seats or steering wheel. It has a few small door dings and I think the paintless dent guys can remove those. Overall, it's a solid and clean car that should be lots of fun. It was also dead stock, not so much as a lid on it.
I'm planning to swap on some larger wheels, lower it a bit, stiffen it a bit, sway bars, exhaust and a "lid". I just want a fun driver to enjoy on nice days. I've actually never owned a convertible in my life, I've always had t tops or targa cars....this should be a new adventure. I don't have many pics, but I'll add a few before I crawl off to bed.
Attached File(s)
![]() ![]() ![]() |
|
|
![]() |
![]()
Post
#2
|
|
FRRAX Owner/Admin ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 15,423 Joined: 13-February 04 From: Ohio Member No.: 196 ![]() |
Good rod ends make a huge difference. The best ones I ever used were made by "FK". They were a properly lined 3 piece design (as I remember) and they were quiet and stayed quiet for a long time. Noise is what prompted me to try the roto joint PHB. I've never had much noise out of heim joints on a PHB, but this was a good excuse to try something new. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/wink.gif)
Last night I got lots of work done. I installed the SLP "lid" and had to use a heat gun to get the MAF to fit. It seems that quality control has dropped considerably on the old 4th gen parts (and/or the molds are wearing out). They used to fit a lot better than they do now. SLP has also changed the hose that they include for 2001/2002 cars. It used to be a molded hose, now it's a straight section (that's not all that straight) and a couple 90 degree elbows and a "straight splice". If you put the straight splice in the end of the factory hose, you can trim it so that a 90 degree fitting is inline with the 90 degree fitting that exits the airbox. I'm sure this is all in the instructions that SLP has now moved online....but I didn't have a computer in the garage....and....it's a LID....I've installed about a dozen of these over the years. lol. The B&M shifter went in as well as a new Hurst 6 speed ball (black). The black version has been discontinued by Hurst, but Summit Racing had one. So, I grabbed it. I've run that shifter ball in all of my cars and I hated to change now. The only one they still carry is the white version. If you want one, you should hurry. The UMI strut tower brace dropped right in. It's a well made piece, it arrived packaged well and with the needed hardware and instructions. It's a strut tower brace, I've likely installed a dozen of these too, but the UMI version is very nice and uses nice thick mounting bases with slots that give plenty of adjustment without making the base too flexible (I think it was the SLP version that had really thin plates with really long slots in it that just seemed underbuilt). They included a couple UMI decals in the box. That's good thinking because guys love stickers. lol. The skip shift delete connectors were installed. I've never had to do this. My 2002 Z28 (that I bought new) never had working skip shift. The light came on, but it never worked. Right from the showroom floor it didn't work. I have no idea why. This is actually the first car I've ever driven with a functioning skip shift....well, it used to be functioning. lol. I added the SLP front license plate bracket. I'm guessing the factory brackets are all long gone and this car came from out of state. Ohio requires a front tag and they will ALWAYS look at the nose of a Camaro or Corvette to see if you actually have a plate on it. So, I put a plate on it. I don't love the look of the SLP bracket, but I like that it can be removed without leaving holes in the nose. When I cleaned out the center console I found the oil change label showing 10/15 or 61k miles as the next oil change. Since the car has 58k on it, I'm guessing that makes the oil change about a year old. Since I'm not really 100% sure of that (I wasn't there), I changed it. It now has fresh synthetic oil and a K&N oil filter. I still need to get under there and install and weld the subframe connectors on, install the PHB and change out the rest of the fluids. After a couple hours playing in the hot garage last night I decided it would be more fun driving it instead of working on it. My wife passed me as I was on the way out of the neighborhood so I went back and picked her up and we put about 50 miles on it while enjoying a perfect evening. This convertible thing might not be so bad after all. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/wink.gif) |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 22nd August 2024 - 08:45 AM |